CatchemCaro Posted October 1, 2010 Report Share Posted October 1, 2010 I was wondering if I'm going to get the rinkles if I put some Createx Auto Air paint over some Dupli Lacquer. The Lacquer is totally finished drying, but before I go ahead and do it I just thought I would post this. I hate to have to re-sand if I don't need to. Thanks Rich Quote Link to comment Share on other sites More sharing options...
BobP Posted October 2, 2010 Report Share Posted October 2, 2010 I don't think there will be any problem - depending on what topcoat you use on the bait. Can't speak to how lacquer would react if you hit it with a solvent based topcoat like Dick Nite, but epoxy would almost certainly not be a problem. Quote Link to comment Share on other sites More sharing options...
airbrushextreme Posted October 2, 2010 Report Share Posted October 2, 2010 I was thinking the same thing I normally dont use laquer paints but in the past I have used autoair over it without any problems Quote Link to comment Share on other sites More sharing options...
CatchemCaro Posted October 2, 2010 Author Report Share Posted October 2, 2010 Thanks guys, I'm using E-tex as my clear coat. I have been using E-tex for all by baits and it's working great so fare. This will be my very first time with the air brush and the Auto Air paints. I assume I can use E-tex over Auto Air paint? Rich Quote Link to comment Share on other sites More sharing options...
RayburnGuy Posted October 2, 2010 Report Share Posted October 2, 2010 E-Tex is an epoxy and will give you no problems over Auto-Air. Quote Link to comment Share on other sites More sharing options...
