toadfrog Posted November 14, 2010 Report Share Posted November 14, 2010 Now I know the plastic mold makers have adapters on their sites so that it will shoot other peoples molds. So I came up with my own variation. I gave it some thought and knowing myself like I do, that I'd better go easy or I'd wind up with hot plastic flying around the room like snot from a runny nose kid or in the end ruin the only injector I have. Ergo I decided to take the least invasive action possible to achieve my goal of one not fooling with an adapter and an injector at the same time . Two having to get the cold boogers out of both. The ports in my molds range from about 3/8 '' to a whapping 1''. You can see my issue with that. So to make along story short I took the nozzle drilled and taped it. found various types of tips to screw into the end . My problem is solved . Being frugal ididn't have to buy more injectors and my lazy streak is satisfied. Quote Link to comment Share on other sites More sharing options...
