Jump to content
fishinnbama

Photofishing Baits

Recommended Posts

If you use an ink jet printer, you do not have to worry about the ink running in case you use solvent based clearcoats, because the ink is water based, so you have to take care not to drop water on the image, because water will make the ink run.

I have used epoxy thinned with solvent, also propionate solution as clearcoats. No problem at all.

I have also printed some images with a color laser printer, and after clearcoating the image was very sharp.

I do not speak about decal paper here, which I have not used yet, and as far as I could get from the information here on TU, spraying a sealer on the image is part of the technological process.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top