If your not familiar with the storage issues of Dick Nite's top coat you will need to read up on how to handle and store it so it doesn't start to cure in the shipping container. Since it is a moisture cure urethane it will start to cure when it is exposed to the moisture in the air. A lot of us use Bloxygen to keep this from happening. Bloxygen is nothing more than Argon gas. Argon is an inert gas that is heavier than air. When sprayed on top of the DN it settles to the surface of the top coat and forms a protective blanket to keep air and moisture from reaching it. If you plan on brushing DN onto your blades you can tap the can that the DN comes in with a sheet metal screw and only draw out however much is needed. If you plan on dipping your blades you will need to use a separate container for dipping. I use a pint mason jar to dip in and leave the rest sealed in the shipping container after spraying Bloxygen into it. This way your not slowly contaminating the whole quart of DN. If you have any questions on storing it just holler and we'll try to help.
so can i take my mig welder and shoot the argon/co2 mix on top of it? then put the lid on?
THANKS FOR THE HEADS UP!!!! YOU GUYS ARE GREAT!!!
Edited by J's Muskie Customs, 26 January 2011 - 09:13 AM.