Jump to content

- - - - -

Air Brush Quick Release Systems??

  • Please log in to reply
1 reply to this topic

#1 BassNator 1

BassNator 1


  • TU Member
  • PipPip
  • 231 posts

Posted 20 March 2004 - 12:12 AM

I was asking a question in the last post about anybody using a quick release system for the air brush. Is any one using anything like this? Pros? Cons? Brands or setups? Any info on that would be appreciated. I was also wondering what the consensus was for shooting paints. Im only doing a few lures for myself but cleanup would be so much easier I believe with a quick relese mechanism. Let me know if any of you are using a similar system. Thanks Cody

#2 Mattman



  • TU Member
  • PipPip
  • 281 posts
  • Location:
    Fergus Falls, MN

Posted 20 March 2004 - 08:17 AM

I just use the same quick connects that you can get at the hardware store.

I've got an "industrial" compressor and it's too noisy to be indoors. So I've got a pair of 8 gallon air tanks. I can fill them up to 125 PSI and bring them inside for use with the airbrush. I mounted a quick connect onto each tank. Then I mounted a nipple and another quick connect onto a moisture trap/pressure regulator. And a nipple to the end of my airbrush 15' hose. I quick connect my regulator to a tank and my airbrush hose to the regulator.