Sign in to follow this  
Followers 0
elpezrosa.com

Material Lip?

9 posts in this topic

First, thanks everyone for sharing so much knowledge.

lip_2.jpg

lip.jpg

Does anyone know the material that made ​​the lip?

Greetings

Juan

PD:Sorry for my English

Share this post


Link to post
Share on other sites

That looks like fibreglass circuit board. Quite a few members use it on TU. Do a Google on G10 circuit board. Your local electronics components stores will probably stock it.

Dave

Share this post


Link to post
Share on other sites

Yep, it's G10 aka FR4 aka Micarta aka circuit board. It is manufactured in many different colors, not just white. In fact, white is often hard to find. Several of the online tackle makers like Janns Netcraft sell pre-made white circuit board lips, or you can buy sheets to cut your own.

Share this post


Link to post
Share on other sites

Yep, it's G10 aka FR4 aka Micarta aka circuit board. It is manufactured in many different colors, not just white. In fact, white is often hard to find. Several of the online tackle makers like Janns Netcraft sell pre-made white circuit board lips, or you can buy sheets to cut your own.

where do you find the white garolite in sheets?????? thanks nugene

Share this post


Link to post
Share on other sites

From past experience, it is easier to just order pre cut lips from jannsnetcraft. I tried making my own and spent about 10 times what it costs from janns. Rob

Share this post


Link to post
Share on other sites

From past experience, it is easier to just order pre cut lips from jannsnetcraft. I tried making my own and spent about 10 times what it costs from janns. Rob

thanks nebyarb......i make a few lips on a table router......they are fine for me......probably don't save anything but i do have the ability to make different types of lips......mcmaster carr has the white but their price has gone from $5 to $17.50 for a 12"x12" piece!!!!!!that's why i'm LOOKING .........thanks and any other help would be appreciated......nugene

Share this post


Link to post
Share on other sites

McMaster at $17/sq ft? Wow! I assume that's not G-10 but some other grade circuit board. G-10 is the basic grade designation. There are different grades with different "G numbers" made from different substrates and different thermoset plastics with higher durability, more fire retardancy, etc. Their G10 board was around $6/sq ft but it was a dull yellow color that I don't like. I did like their G-11 board which was an attractive light green color but cost a few bucks more. You can peruse the grade specs at their website.

The last white G-10 I found was at asprocketry./com, an amateur rocket builders site. Somebody told me their G-10 is no longer white, so I can only suggest you inquire about color before you buy from any online source. Most users don't care about color,but most of us crankbait makers do.

BTW - McMaster-Carr carries circuit board under the generic name of GAROLITE (yet another aka for circuit board!).

As far as "why buy sheets?" - because you're out in the cold if Janns doesn't happen to carry that pre-cut size/shape among their limited selection! One 12"x12" sheet will make LOTS of lips!

Share this post


Link to post
Share on other sites

McMaster at $17/sq ft? Wow! I assume that's not G-10 but some other grade circuit board. G-10 is the basic grade designation. There are different grades with different "G numbers" made from different substrates and different thermoset plastics with higher durability, more fire retardancy, etc. Their G10 board was around $6/sq ft but it was a dull yellow color that I don't like. I did like their G-11 board which was an attractive light green color but cost a few bucks more. You can peruse the grade specs at their website.

The last white G-10 I found was at asprocketry./com, an amateur rocket builders site. Somebody told me their G-10 is no longer white, so I can only suggest you inquire about color before you buy from any online source. Most users don't care about color,but most of us crankbait makers do.

BTW - McMaster-Carr carries circuit board under the generic name of GAROLITE (yet another aka for circuit board!).

As far as "why buy sheets?" - because you're out in the cold if Janns doesn't happen to carry that pre-cut size/shape among their limited selection! One 12"x12" sheet will make LOTS of lips!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0