Jump to content
Coley

Vacuum Former

Recommended Posts

bbf, i got mine at our local tractor supply company. I have found that 3/16 inch holes spaced 1/2 inch apart is good for my platen(punch plate). I made sure that there are ateast 3 holes will be under my baits at all times to insure even pull around them. I started out with 30ths but went to 15ths as it pulls easier and cuts alot better than the thicker stuff.

Hope this helps!

Jeff

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top