Jump to content
tacklekid11

Roatating Tail Section

Recommended Posts

Just as a suggestion, cause I never tried this, I would drill out the tail section the way you want it then either dip it with a smaller diameter wire or thread though it, let it set several minutes, then pull the wire out, or you could always dip it and blow the hole out with a hypodermic or air gun. Just ideas....

Link to comment
Share on other sites

if it rotates the wire will wear thru sealer,you might want to get some brass tubeing ( most hobby shops sell it ) just bigger then your wire drilling a hole the size of the outside of the tubing coat it with super glue and press into the hole then clear coat the lure shoud take care of any water inside the lure and it will spin better on the tubing

Link to comment
Share on other sites

A brass tubing sleeve will protect the lure from wear, and is a great idea if it doesn't add too much weight.

If brass tubing is too heavy, try a small section of thin drinking straw, like the kind that comes in bar drinks (don't ask me how I know that).

If you use PVC as you lure building material, you won't have to worry about water intrusion, since it's totally waterproof.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top