Jump to content
Devcon 2 Ton-2nd Coat
8 replies to this topic
Posted 06 November 2011 - 06:31 PM
When applying a 2nd coat of Devcon 2 ton as a final finish does the first coat need to be sanded and or cleaned with denatured alcohol or acetone?
Posted 06 November 2011 - 06:43 PM
No, you can apply epoxy over epoxy without any surface prep.
Posted 06 November 2011 - 11:57 PM
Not my intention to hijack this thread, but, on the subject of epoxy...who do you guys buy your Bob Smith from?
Posted 07 November 2011 - 01:13 PM
If you are near New Orleans, Hub Hobby on Jefferson HWY.
Posted 07 November 2011 - 02:03 PM
Local hobby shops should carry it. RC hobbyists have been using it for years. You can also order it online or through e-bay. I prefer the BSI 30 minute Slow Cure Epoxy over their 20 minute Finish Cure and D2T 30 minute.
Posted 07 November 2011 - 09:41 PM
Thanks, Cap. I'm headed that way on Wednesday. Looks like it's located on Airline, tho.
Posted 14 November 2011 - 04:31 PM
That's what I meant. Did you find it?
Posted 14 November 2011 - 09:13 PM
Them suckers were closed...in the middle of a weekday. I got a Devcon kit that I'm gonna try, but, will probably order the Bob Smith online. I'm havin' a dickens of a time with this epoxy.