Jump to content

- - - - -

Baking Paint

  • Please log in to reply
1 reply to this topic

#1 Cmiller23



  • TU Member
  • PipPip
  • 32 posts
  • Location:
    Oklahoma City

Posted 31 December 2011 - 12:06 AM

Has anyone messed with baking paint on the unpainted crankbait bodies that you can buy?

What type of paint do you use?

#2 bassnbrad



  • TU Member
  • PipPip
  • 173 posts
  • Location:

Posted 31 December 2011 - 01:33 AM

I don't know about baking paint, but I have had a couple of the rc 2.5's swell up and split when a 100 watt iridescent bulb was placed about 12-14 inches above them to dry paint. I have not had any problem with the 1.5's which I hang in a homemade drying box with the same 100 watt bulb. But the bulb is below with the baits hanging vertically. I mostly use the less expensive paints from Hobby Lobby.