Jump to content
benton B

line tie

Recommended Posts

The best way is to find some micro drill bits the size of your wire. But if you can't do that....... Bend your wire in a U shape around a small finishing nail. Mark on the lexan where you wan the line tie to be. Heat the ends of the wire with a candle and place the ends where you marked the lexan. Once the wire melts its way into the lexan then heat the wire in the center and just apply LIGHT pressure untill it pops through. Bend the ends of the wire back to the end of the lip and insert the lip with epoxy.

Skeeter

Link to comment
Share on other sites

Thanks for the compliment and ask anytime. The baits that are posted on the board are two years old. There has been alot of improvement since those pictures were taken. If you have any questions about them or about anything else in making your baits just ask. That is what we are here for.

Skeeter

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top