Jump to content
retrobass

Fishair = Awesome Fin Material

Recommended Posts

I use lexan for fins, I cut and shape it using the sanding drum. I then dye some 5 min epoxy adhesive with my chosen color of soft plastic dye, I then mix in the hardener. This is applied to the fin. Once the epoxy begins to set use a small tooth brush or toothpick to add bone texture to your fin. I then epoxy these in place on my swimbaits just be fore I apply the final coat of finishing epoxy, this way the fins get a coat too.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top