Where To Find Balsa Crankbait Bodies That Aren't From Netcraft Or Lurepartsonlinelure making crankbait
7 replies to this topic
Posted 08 March 2012 - 09:22 PM
Looking to get into luremaking full swing, and I really want to start off with larger sized flat sided cranks. Bought some from both LPO and netcraft (only 7/16" wide, in both sizes and not full bodied enough), but they were not as large as what I want. I think what I'm looking for is a body size about like the Bagley's B-flat, or larger. If anyone can help, I'd greatly appreciate it.
Posted 08 March 2012 - 10:14 PM
Why not cut them out yourself? It can be accomplished with very limited hand tools, and you can get whatever shape you want in whatever size you want. Balsa can be found at hobby shops or ordered online.
Posted 17 March 2012 - 04:49 PM
I've made baits before out of balsa and cedar, and it's just a pain. I like making baits, but not cutting out the bodies, and I'm no good at getting the edges right. Anyway, if anyone has any input on this, maybe a CNC mill that can cut them out in volume or another company that's out there selling something a bit different, it would be greatly appreciated.
Posted 18 March 2012 - 01:22 PM
I 100% agree with RaburnGuy I have made some very nice wood blanks from nothing but a utility knife and a peice of sandpaper, and still do so to this day. Personally I don't understand how one could make a lure without carving it themselves. Seeing a lure that you carved yourself can make one feel very accomplished, more so than a lure that has only been painted by ones self. I must say though the biggest advantage of carving your own lures is carving a unique lure of your own design. One that could possible revolutionalize lure making itself. You should at least just give it a try, I made my first one in my family room after school one knight.
Posted 18 March 2012 - 01:32 PM
Nothing like starting with a block of balsa and three grades of sandpaper. Throw in a dremel, a file or two, a carving/exacto knife, and a dust mask if you prefer. Or just a block of balsa and three grades of sandpaper.
Edited by pizza, 18 March 2012 - 01:34 PM.
Posted 18 March 2012 - 02:20 PM
Yeah, I don't want to do all that, I have before and for me, it's very time consuming. I only make my own lures because what I want isn't sold anymore, so for me, it's all about getting to a finished product as quickly as possible. I'm probably not far from buying my own CNC machine to make what I want.
Posted 18 March 2012 - 08:41 PM
Obviously, the companies selling pre-formed balsa baits aren't doing it themselves. I'd contact Janns and LPO, explain what you need and ask them for contact info on their supplier.
Also tagged with one or more of these keywords: lure making, crankbait