Jump to content
ROWINGADUBAY

Making Identical Length Flourocarbon Leaders Or Traces

Recommended Posts

You can use a pre pegged board . Make a board with nails or something like that to attach your hook or lure to add a second nail for the swivel at a pre determined length attach both to the nails and go at it. Just like making a jig for carpentry . Very easy screw on a nail clipper or razor blade a bingo a tying board. By having a couple of nails or say eye hooks those twist in screws more pre set leader lengths can be very fast to tie. Or say a pieces 3/4" PVC pipe cut to 16" with a glued on cap and a removable cap can store leaders . 1 Then drill a hole in one end to attach the hook or lure 2 -attach 2 open end eye hook screws 12" part to attach the lure and swivel .Tying 1' -2' -3' ect leaders become easy as wrapping the leader around those eye hook screws and lure. You can probably add a razor blade inside the removable cap and by cutting the cap expose a mall section of it for cleaning the rigging up. Or a nail clipper or small scissor attached with velcro may hold up. Ya know what I'm going to do this because fishing on a kayak is all about organization . I pre cut all my leader to 3ft and store it in a ip lock bag but it's not that great.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top