Jump to content

- - - - -


  • Please log in to reply
No replies to this topic

#1 speechless33759



  • TU Member
  • PipPip
  • 28 posts

Posted 21 May 2012 - 12:36 PM

Hey guys, I've been experimenting with a resin pour with Microballoons. I'm using a 1:1 MB to hardener and 1:1 MB to resin ration. I'm not getting a good "Float" with the weights in, it'll hang sideways rather than straight up and down as I'd like. have any of you tried a higher ratio of MB to resin/hardener with success?