Guest Gangel Posted July 11, 2012 Report Share Posted July 11, 2012 I've got an old Herters 4a4 bell sinker mold. The number 7 barrel swivels do not fit in this. Anybody played with anything that would fit? I'd also be happy finding just a brass loop with a tail to insert. Almost something like what production bell sinkers have, with that little hammered end on the opposite end. I would like something either with an end, or long enough tail I can make crooked so that it doesn't pull out of the lead. Quote Link to comment Share on other sites More sharing options...
cadman Posted July 12, 2012 Report Share Posted July 12, 2012 I don't have that mold, can you take a pic of the inside so we can see what it looks like. I'm sure once you post a pic everyone will give you good feedback and lots of ideas. Quote Link to comment Share on other sites More sharing options...
Guest Gangel Posted July 12, 2012 Report Share Posted July 12, 2012 Here is a pic... it's probably small. I stole it from an ebay ad. Quote Link to comment Share on other sites More sharing options...
Guest Gangel Posted July 12, 2012 Report Share Posted July 12, 2012 Here's a bigger one. Quote Link to comment Share on other sites More sharing options...
Ogajiga Posted July 12, 2012 Report Share Posted July 12, 2012 I could be wrong, but that mold looks like it was designed for CRANE swivel inserts? Quote Link to comment Share on other sites More sharing options...
Guest Gangel Posted July 13, 2012 Report Share Posted July 13, 2012 I'm thinking it was meant for non swivels. I'd type something else, but I don't want to sound stupid. I'm thinking I'm gonna have to just twist eyes myself. Quote Link to comment Share on other sites More sharing options...
