Jump to content
garyo1954

Stencil Making With A Silhouette Cameo

Recommended Posts

Okay, you just finished airbrushing that new lure. It looks great!

But it needs something. Maybe some spots or lines, or just something to make it stand out as an original. Maybe you just want to personalize it.

DSCN5433.JPG

If you’ve got an airbrush, you’ve probably used a stencil. And stencils don’t have to be fancy.

DSCN5437.JPG

Maybe some old netting for scales, a pocket comb for stripes. Something you’ve cut by hand or something bought for other purposes. You can even get patterns offline which you can print and cut. Something like this.

2898014_f520.jpg

For a simple stencil you could resize this pattern in Paint, print it, cut it with an exacto knife, lay it against your lure and spray. In this tutorial we’re going to use the same principles to cut this design with a Silhouette Cameo. From the Silhouette America site found here: http://www.silhouett...uetteCameo.aspx

“The Silhouette CAMEO® is an electronic cutting tool for personal use. Like a home printer, it plugs into your PC or Mac® with a simple USB cable. However, instead of printing it uses a small blade to cut paper, cardstock, vinyl, fabric and more up to 12" wide and 10 feet long.”

This may be the first you have heard of these machines. I learned of them from a friend who does scrapbooking. I got very interested in the idea when a group in hard baits began to toss around the idea of using such a machine to make stencils.

And this may very well be the first tutorial on using a personal cutter to create a fishing lure stencil. I’m happy to post it a TU.

We get started just as we would if we planned to download an image and cut it by hand.

We can go to any search engine and type in something like “fishing lure patterns” and click images.

lurestencil.jpg

I’ve already located this pattern (highlighted in the red box). Normally you’ll want something with a higher resolution, something around 350 by 350, but for this exercise, we can use this pattern.

Save this image to your computer and open Silhouette Studio.

interface.jpg

The interface is fairly intuitive. On the right side you’ll find the icons for text, trace, fill patterns, cutting, aligning, duplicating, etc. The left side has the same options under the headings Edit or Object. Now OPEN the file you downloaded into Studio.

openfile.jpg

The little triangle in the upper right corner alerts you this is a low resolution image. Not a problem for what we are doing. But as I mentioned earlier, it is best to find an image around 350 x 350. So let’s move on. We need to TRACE the pattern we want to use. And to do that we open the TRACE menu and choose Select Trace Area.

Step #1: Draw a box around the area to TRACE. Make sure to highlight all the areas we want to remove. In working with an image in Studio always make sure the image is selected. If you see the measure lines and green dot, the image is selected.

trace.jpg

Uncheck the high pass filter…..in this case the pattern highlights in yellow.

highpass.jpg

If necessary, we can adjust the threshold setting until everything we want removed turns yellow. Then click “Trace Outer Edge,” the second option in the menu.

traceedge.jpg

The box and yellow highlight will disappear and the pattern will now be outlined In red.

Step #2: Remove the white background. To do that we MODIFY the image.

First, we need to duplicate our cut lines. We’ll move our original image off to the side, open the REPLICATE window, and select duplicate. You can duplicate it above, below, left, or right. Doesn’t matter. You now have two sets of cut lines.

duplicate.jpg

We now put our image back on top the cut lines and open the MODIFY window.

crop.jpg

We select Crop and the whitebackground disappears.

crop2.jpg

Step #3: Those little black lines show each individual part of our pattern. We need to GROUP these to keep them in place. We RIGHT CLICK on the pattern and a window will open. Click Group.

group1.jpg

We can now select both groups, make sure you have lines around everything, like the following picture and ALIGN them using the Center option. Like this:

align.jpg

The images will automatically move together......

align2.jpg

Step #4: The final step is to GROUP this pattern…..

group2.jpg

Once we do that we have an image we can make larger or smaller depending on the size stencil we need.....

finalstep.jpg

Those are the basic steps to making a stencil. You can now size these and cut with the Cameo.

Or using the scale and mirror options you can make a two sided stencil like this.

mirror.jpg

I went ahead an made the two sided stencils in various sizes. Once we send it to the cutter we'll have the finished product....

DSCN5444.JPG

We have taken an image off the internet, made two sided stencils in 1 ½”, 2”, 2 ½”, 3”, 3 ½”, 3 ¾”, and 4” in reusable 4 mil vinyl.

DSCN5445.JPG

Although this process may seem a bit complicated, for start to finish it can be done in about half hour. And you are not limited to downloading images, you can design your own with the tools included in the software.

Like I've said in other threads, the Silhouette Cameo is not just a one dimensional machine. It can be used for cards, gift boxes, scrapbooking, window decals, mailbox or any type lettering. The wife can use it, the kids can use it, maybe even the dog could learn. It is simple once you get familiar with the interface.

And you can make great looking fishing lure stencils at home! (Or stencils for anything you want to paint.)

*This tutorial was the result of a few guys brainstorming in the hard baits section of TU. I have not been compensated in any way by anyone for writing it or using the Silhoutte Cameo. There are other machines on the market that offer the same capabilities.*

This has actually been one of the most fun projects I undertaken on TU so thanks to everyone who had a brain in that storm!

And yep. The lures in the first picture were dotted and spotted and striped and personalized using stencils cut by this method.

G

DSCN5433.JPG

DSCN5437.JPG

2898014_f520.jpg

lurestencil.jpg

interface.jpg

openfile.jpg

trace.jpg

highpass.jpg

traceedge.jpg

crop.jpg

duplicate.jpg

crop2.jpg

group1.jpg

align.jpg

align2.jpg

group2.jpg

finalstep.jpg

mirror.jpg

DSCN5444.JPG

DSCN5445.JPG

DSCN5433.JPG

DSCN5437.JPG

2898014_f520.jpg

lurestencil.jpg

interface.jpg

openfile.jpg

trace.jpg

highpass.jpg

traceedge.jpg

crop.jpg

duplicate.jpg

crop2.jpg

group1.jpg

align.jpg

align2.jpg

group2.jpg

finalstep.jpg

mirror.jpg

DSCN5444.JPG

DSCN5445.JPG

DSCN5433.JPG

DSCN5437.JPG

2898014_f520.jpg

lurestencil.jpg

interface.jpg

openfile.jpg

trace.jpg

highpass.jpg

traceedge.jpg

crop.jpg

duplicate.jpg

crop2.jpg

group1.jpg

align.jpg

align2.jpg

group2.jpg

finalstep.jpg

mirror.jpg

DSCN5444.JPG

DSCN5445.JPG

DSCN5433.JPG

DSCN5437.JPG

2898014_f520.jpg

lurestencil.jpg

interface.jpg

openfile.jpg

trace.jpg

highpass.jpg

traceedge.jpg

crop.jpg

duplicate.jpg

crop2.jpg

group1.jpg

align.jpg

align2.jpg

group2.jpg

finalstep.jpg

mirror.jpg

DSCN5444.JPG

DSCN5445.JPG

DSCN5433.JPG

DSCN5437.JPG

2898014_f520.jpg

lurestencil.jpg

interface.jpg

openfile.jpg

trace.jpg

highpass.jpg

traceedge.jpg

crop.jpg

duplicate.jpg

crop2.jpg

group1.jpg

align.jpg

align2.jpg

group2.jpg

finalstep.jpg

mirror.jpg

DSCN5444.JPG

DSCN5445.JPG

DSCN5433.JPG

DSCN5437.JPG

2898014_f520.jpg

lurestencil.jpg

interface.jpg

openfile.jpg

trace.jpg

highpass.jpg

traceedge.jpg

crop.jpg

duplicate.jpg

crop2.jpg

group1.jpg

align.jpg

align2.jpg

group2.jpg

finalstep.jpg

mirror.jpg

DSCN5444.JPG

DSCN5445.JPG

DSCN5433.JPG

DSCN5437.JPG

2898014_f520.jpg

lurestencil.jpg

interface.jpg

openfile.jpg

trace.jpg

highpass.jpg

traceedge.jpg

crop.jpg

duplicate.jpg

crop2.jpg

group1.jpg

align.jpg

align2.jpg

group2.jpg

finalstep.jpg

mirror.jpg

DSCN5444.JPG

DSCN5445.JPG

post-21306-0-57695200-1342320474_thumb.jpg

post-21306-0-92567000-1342320533_thumb.jpg

post-21306-0-44010600-1342320562_thumb.jpg

post-21306-0-83965300-1342320705_thumb.jpg

post-21306-0-50805300-1342320823_thumb.jpg

post-21306-0-51239100-1342320956_thumb.jpg

post-21306-0-40406600-1342321226_thumb.jpg

post-21306-0-15307400-1342321477_thumb.jpg

post-21306-0-67901900-1342321682_thumb.jpg

post-21306-0-15192800-1342321809_thumb.jpg

post-21306-0-54379000-1342321917_thumb.jpg

post-21306-0-92326000-1342322076_thumb.jpg

post-21306-0-58136200-1342322173_thumb.jpg

post-21306-0-76164300-1342322410_thumb.jpg

post-21306-0-40102200-1342322494_thumb.jpg

post-21306-0-34916900-1342322571_thumb.jpg

post-21306-0-76681800-1342322929_thumb.jpg

post-21306-0-20822900-1342323072_thumb.jpg

post-21306-0-82869200-1342323122_thumb.jpg

post-21306-0-96500800-1342323150_thumb.jpg

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top