Jump to content
weedsnager

Envirotex Issues

Recommended Posts

First I try my best not to touch the bait with my fingers after is painted. If I were to get a little dust on them, I wipe them off with a dry clean rag... gently. I have had no problems if I follow those rules. Also u want to make sure your paint is totally dry. Its a PIA, but works for me.

Link to comment
Share on other sites

After the lure is sealed I never touch again without gloved hands...if you have been handling them without gloves, the natural oils from your skin can cause issues. Wipe down with some denatured alcohol.

Also some paints will cause this, I have a pearl orange paint I hand mix and it cause fisheyes if the etex hasn't set up enough. I've also had that happen if my mix wasn't exactly 50/50, are you using syringes to measure? A lot of syringes purchased at stores contain silicone to make them slide better...very bad for etex. Get them from a rod building supply store.

Best of luck, etex has ruined many a day for me during the learning curve.

Best

MS

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top