CObasser Posted April 8, 2014 Report Share Posted April 8, 2014 Tryin to get a really smooth finish on some clay masters I made , Any tips on sealing to get the best finished product ? Quote Link to comment Share on other sites More sharing options...
CObasser Posted April 8, 2014 Author Report Share Posted April 8, 2014 FYI .......I'm going to be making silicone molds Quote Link to comment Share on other sites More sharing options...
mark poulson Posted April 8, 2014 Report Share Posted April 8, 2014 I spray mine with rattle can clear acrylic. It's to make sure the silicone doesn't bond, but it also smooths the clay a little. But getting it as smooth as you can first helps. If the clay gets too warm and sticky, put it in the freezer to cool it back down and make it easier to work with. Quote Link to comment Share on other sites More sharing options...
squid Posted April 8, 2014 Report Share Posted April 8, 2014 Ive been using Sculpey satin glaze. I use 2 or 3 coats and sand REAL lightly after each one before final seal. No release agent needed. Bit of a process but it seems to work well. Quote Link to comment Share on other sites More sharing options...
