taylor1595 Posted April 9, 2014 Report Share Posted April 9, 2014 I've got a 6" line through swimbait I have sculpted out of sculpy and I'm wanting to make a mold of it. My questions are if the 1 lb will be enough to make the mold or not? Also are there cheaper places to get it other than straight from alumilite? I've made some molds with tube silicone and they are ok but would like to have a nicer mold for this bait. Quote Link to comment Share on other sites More sharing options...
nedyarb Posted April 9, 2014 Report Share Posted April 9, 2014 40% off coupon at hobby lobby. It's 30$ but 18$ with coupon Quote Link to comment Share on other sites More sharing options...
pat28 Posted April 10, 2014 Report Share Posted April 10, 2014 My (limited) experience. Thought 4 pounds would be overkill for a 10 inch muskie bait. Had to reorder to complete the mold. Look up Smooth On products. easy to work with, relatively affordable. Pat Quote Link to comment Share on other sites More sharing options...
Anglinarcher Posted April 10, 2014 Report Share Posted April 10, 2014 nedyarb is sooo right if you have a Hobby Lobby in the area. I have not located any other brand in my local stores and have not tried Smooth On products. Quote Link to comment Share on other sites More sharing options...
taylor1595 Posted April 10, 2014 Author Report Share Posted April 10, 2014 Thanks guys! May have to send the wife to hobby lobby. Do they usually keep it in stock at the stores? Quote Link to comment Share on other sites More sharing options...
nedyarb Posted April 10, 2014 Report Share Posted April 10, 2014 They have it stocked at my store, it's kind of by the model card. Quote Link to comment Share on other sites More sharing options...
nedyarb Posted April 10, 2014 Report Share Posted April 10, 2014 Cars Quote Link to comment Share on other sites More sharing options...
