Zbass Posted June 16, 2014 Report Share Posted June 16, 2014 (edited) Where can I find someone that makes these jigheads in bulk? This ia a picture of the 1/4 oz size and am interested in 1/4 and 3/8 oz heads. It is an Arkie style head with twin wire guards. I believe it is a Gami EWG hook. Thanks in advance. Z Edited June 16, 2014 by Zbass Quote Link to comment Share on other sites More sharing options...
Jig Man Posted June 16, 2014 Report Share Posted June 16, 2014 Cadman or smalljaw may be able to help you out. Quote Link to comment Share on other sites More sharing options...
Apdriver Posted June 17, 2014 Report Share Posted June 17, 2014 If I had to make some of these, here's what I would do. I would take a Teflon pin and drill a hole in it just big enough for that wire to go through it doubled. Lay it in whatever weedless jig mold you want that wire in and pour it. Make sure the Teflon pin stops right at the edge of the cavity for a clean look. You might need to seperately the wire just a little below your Teflon pin just a bit so the weedguard will hold good in the jighead after it's poured. Never tried it but believe it would work. Quote Link to comment Share on other sites More sharing options...
big will's customs Posted June 17, 2014 Report Share Posted June 17, 2014 apdriver is right on the money I made some of these but I used 1/8 wooden dowel rods that I cut and drilled works great. take care and god bless Quote Link to comment Share on other sites More sharing options...
