Jump to content
4 Banger Fluid Bed
4 replies to this topic
Posted 16 September 2014 - 10:28 AM
I'd like to thank cadman and his tutorial. I just got back from the hardware store from getting rubber bumpers for the bottom of the plexiglass. While I was there I picked up some paper bags for filters. I got several different sizes: 1/2,1,3,5, and 10. I have other different filters I am going to try. I will report my findings. Can't wait to this thing is set and ready to use. Tried to post a pic, but it was too big
Posted 06 October 2014 - 03:22 PM
Hope it all works out for you. Good luck, and if you run into problems post your questions, so we all can help you.
Posted 26 October 2014 - 11:57 PM
You use Plexi glass in making your fluid beds?
I've never done them that way.
I just made some more using 3" end caps epoxied in some aquarium valves and they worked great.
Posted 30 October 2014 - 05:07 PM
I have most of my powders flowing decently, but the black and blue are still giving me hell. Going to try the vacuum bags next.
Posted 12 August 2015 - 11:40 AM
I am about to build a fluid bed for dipping my hand made weights. Can you post some pics so I can get some better ideas than what I see on YouTube. I don't know if I trust the the filter yet with the hot material next to it.