Jump to content
7 replies to this topic
Posted 20 July 2004 - 07:18 PM
Decided to use a salmo jerk bait design turned into crankbaits with some photo finishing, Hope you guys like them.
Posted 20 July 2004 - 07:43 PM
That is what a photo-finish bait is supposed to look like. Very nice.
Posted 20 July 2004 - 08:16 PM
I especially like that green lure on the bottom! How big are they?
Posted 20 July 2004 - 09:17 PM
thanxs for compliments guys!!, Siebler your package is sent (3 sizes of mesh) Jed, i learned by looking at your master pieces!!!, and Dev, they are 5 1/2 inches long 5 / 8 wide and 2 1/ 4 inches high at the highest point , you can"t tell by the photo but they taper right down from the belly hook down to the tail ( just over a 1/ 4 inch left at the tail eye screw) and have the head tapered into a point as well, Skeeter, thanxs for that sweet idea!!, thats what i love about this board, everyone helping out where they can with info,tips,and advice! , for the rookies and veteran builders alike!! thanxs Rob
Posted 21 July 2004 - 05:27 AM
Jed, the action is very simliar to a big o,with the shallow (3ft)and med divers(8ft) having a nice wiggle when cranked backed, even bigger side to side kick when retrived slowly,and the 2 metal lipped divers only have a little tight wiggle but will go deep, great for trolling!!! Rob