Ccfish Posted January 19, 2015 Report Share Posted January 19, 2015 Gonna be purchasing a twininjector from basstackle. Was wanting to know if there is any issues with using the larger 6oz injector when i Dont have any molds over 2 cavitys as of right now and will only be doing small batches of plastic (just getting started)Just dont want to be limited later but want everything to work as it should. Thanks Quote Link to comment Share on other sites More sharing options...
CNC Molds N Stuff Posted January 19, 2015 Report Share Posted January 19, 2015 It might be hard to gage how much plastic you are using or if the mold filled or not, but other than that not really. If you work efficiently you can fill several of your small molds with it on each draw. ... Quote Link to comment Share on other sites More sharing options...
wallyc14 Posted January 19, 2015 Report Share Posted January 19, 2015 I have the baitjunkys prolam w/ the larger injecters I shot small batches . The only difference I see is you have to give your self a little swing room with it that's about it because of the larger size but like bob said I shot multiple molds to make it worth the effort Quote Link to comment Share on other sites More sharing options...
Driftwood Posted January 19, 2015 Report Share Posted January 19, 2015 I have the 3 oz. size and all my molds are 4 cavity. It's easier to handle bit you can't shoot as many molds. If you have more than 5 or 6 molds that you are shooting laminated colors with, then I would go with the 6 oz. Quote Link to comment Share on other sites More sharing options...
ipt Posted January 19, 2015 Report Share Posted January 19, 2015 get the 6 oz, they can hold less plastic but the 3oz cant hold more! Quote Link to comment Share on other sites More sharing options...
Apdriver Posted January 20, 2015 Report Share Posted January 20, 2015 Buy the large injector. I bought the small twin first then bought Baitjunky Prolam 7 oz. cause I ran out of injector. Quote Link to comment Share on other sites More sharing options...
Ccfish Posted January 20, 2015 Author Report Share Posted January 20, 2015 Thanks for the advice guys. Went ahead and bought the large one, picked up a BT Flippin hog and tail mold too. Quote Link to comment Share on other sites More sharing options...
archery1 Posted January 22, 2015 Report Share Posted January 22, 2015 i love my bt twin injector. only downfall i found is... it is pretty thick and should be heated up alittle b4 shooting baits. Quote Link to comment Share on other sites More sharing options...
Frank Posted January 23, 2015 Report Share Posted January 23, 2015 In the winter I put mine below my griddle to warm it up. The heating element sets on it just enough to warm it up. These things are built like a tank so no worries about damaging them. You are going to love it. Quote Link to comment Share on other sites More sharing options...
RSNeely Posted January 25, 2015 Report Share Posted January 25, 2015 I got the 3 ounce with mine but I understand they are interchangeable. I'll be getting 2, 6 ounce ones in the near future I think. Quote Link to comment Share on other sites More sharing options...
