Bogbaits Posted February 14, 2015 Report Share Posted February 14, 2015 Just wanted to Let everyone new to the lure pouring and some who may want the info,I have a Soft Plastic Lure Biz and am doing a Large volume of orders daily,i see all the request for info on the pots and injection systems but just wanted anyone who wants to know that I have 4 microwave ovens and sometimes have them going all at once and I think I can outpour your small pots and injection machines when it comes to different colors and floating and sinking plastic,maybe even one color,just want a lot of the newbies to know that mics are still a great way to heat plastic and you have the option to heat so many different colors in a short period of time,my store carries over 900 different color/flake combinations so the pots and injection systems will slow you down,not knocking any of your machines,just wanted to share my info 1 Quote Link to comment Share on other sites More sharing options...
Bogbaits Posted February 14, 2015 Author Report Share Posted February 14, 2015 Just to ad the mics are 1000 watt each and I am heating 16 ounces of plastic but think I can heat 8 ounces in each and still pour more than your injection and pouring pots Quote Link to comment Share on other sites More sharing options...
Frank Posted February 14, 2015 Report Share Posted February 14, 2015 I am with you on this post. I have two microwaves and a griddle. A machine does not take the place for a good system. I do use presto pots but more time than not it is a microwave and griddle. Can change colors in ten minutes. Can heat a quart of plastic in 7minutes and thirty seconds. Two of them gets me twice as much. The rest is adding color and glitter. Nothing can beat a good system!!! 1 Quote Link to comment Share on other sites More sharing options...
Bogbaits Posted February 14, 2015 Author Report Share Posted February 14, 2015 I agree Frank,I just wish more people would come forward on this, and let the newbies know the mics are still king!!!So much is writin on the pots and injection systems and in my experience which is about 8 years doing this in a biz they don't even come close!!! Quote Link to comment Share on other sites More sharing options...
djs Posted February 14, 2015 Report Share Posted February 14, 2015 I agree Frank,I just wish more people would come forward on this, and let the newbies know the mics are still king!!!So much is writin on the pots and injection systems and in my experience which is about 8 years doing this in a biz they don't even come close!!! Can I ask which plastic do you use? Quote Link to comment Share on other sites More sharing options...
Bogbaits Posted February 14, 2015 Author Report Share Posted February 14, 2015 After countless plastic samples and trial and error I have found that Lurecraft saltwater plastic or jig plastic as they call it is the best,I get maximum reheats from it without yellowing or burning,have not even had to use stabilizer,yes it hard packs but it takes 2 minutes to to stir it,not a half hour like some people post on here,it has all the good stuff in it and is not as expensive as some plastics,I heat ot hot and often Quote Link to comment Share on other sites More sharing options...
Bogbaits Posted February 14, 2015 Author Report Share Posted February 14, 2015 Oh and no bubbles with a 1000 watt microwave!!! Quote Link to comment Share on other sites More sharing options...
djs Posted February 14, 2015 Report Share Posted February 14, 2015 (edited) I just ordered a sample from lurecraft yesterday of the medium and 60/40 blend. Does it have any problems with bubbles in the microwave? We'll you beat me to the question. Edited February 14, 2015 by djs Quote Link to comment Share on other sites More sharing options...
Bogbaits Posted February 14, 2015 Author Report Share Posted February 14, 2015 I think that plastic is ok if you stir it half way through the heating process,remember the wattage of your mic has a lot to do with bubbles,I like the salt water as its stiffer and has all the additives full strength,but when I say stiffer its not hard like you would think,get a sample of it to try,I think you will be surpised Quote Link to comment Share on other sites More sharing options...
Bogbaits Posted February 14, 2015 Author Report Share Posted February 14, 2015 Also the 1000 watt microwaves I purchased at walmart for 59.00 each so you do the math 250.00 for a heating system that will let you handle any production situation!!!Cant beat it!!! Quote Link to comment Share on other sites More sharing options...
Driftwood Posted February 15, 2015 Report Share Posted February 15, 2015 I use the microwaves to heat my plastic and then use fry daddy to keep the plastic heated while I inject my molds. I also use the mic to remelt the sprue's to cut down on wast. I have also been doing this for about 9 years and using the microwave is the fastest way to heat plastic for use with a fry daddy, presto pot, or the lee pouring pot that I have found so far. Hope this helps. Quote Link to comment Share on other sites More sharing options...
camrynekai Posted February 17, 2015 Report Share Posted February 17, 2015 I agree and disagree. Been pouring since 1993 and was in business full time from 1996-2010 and to be honest, there is NO way I could have pumped out the 50,000- 70,000 baits per month with Pyrex....just not happening. For the weekend guy that wants to play with this awesome hobby, Pyrex is fine....minus the injury possibilities and inconsistencies. 2 Quote Link to comment Share on other sites More sharing options...
Frank Posted February 17, 2015 Report Share Posted February 17, 2015 I agree and disagree. Been pouring since 1993 and was in business full time from 1996-2010 and to be honest, there is NO way I could have pumped out the 50,000- 70,000 baits per month with Pyrex....just not happening. For the weekend guy that wants to play with this awesome hobby, Pyrex is fine....minus the injury possibilities and inconsistencies. So could you tell us your method? Not that I want to produce that many baits but something might be useful to me and others. Quote Link to comment Share on other sites More sharing options...
camrynekai Posted February 17, 2015 Report Share Posted February 17, 2015 Heat exchanger to preheat my plastic and modified Lee pots to pour out of. I am just not a fan of Pyrex....all it takes is one time to witness a plastic burn and it WILL make you think twice about using them. A very smart fella once stated on this forum "its not if...but when a Pyrex cup Will shatter." 2 Quote Link to comment Share on other sites More sharing options...
djs Posted February 17, 2015 Report Share Posted February 17, 2015 Heat exchanger to preheat my plastic and modified Lee pots to pour out of. I am just not a fan of Pyrex....all it takes is one time to witness a plastic burn and it WILL make you think twice about using them. A very smart fella once stated on this forum "its not if...but when a Pyrex cup Will shatter." Can you post a pic of the heat exchanger? Quote Link to comment Share on other sites More sharing options...
camrynekai Posted February 17, 2015 Report Share Posted February 17, 2015 I don't have any photos of my old system (only my new ones) I will however look at my Ebay account and see who I sold it to (I think it was Tod from Snoozers baits).....maybe he will send me some photos. I do know it was a 1750watt unit with 1/2NPT fittings and I ran it at 3PSI (required dedicated receptacle) Quote Link to comment Share on other sites More sharing options...
Driftwood Posted February 17, 2015 Report Share Posted February 17, 2015 I agree with camrynekai, a heat exchanger is a lot faster than a microwave if you are going to produce a very large volume of baits. It's just a little costly to get started with. 1 Quote Link to comment Share on other sites More sharing options...
Frank Posted February 17, 2015 Report Share Posted February 17, 2015 I don't have any photos of my old system (only my new ones) I will however look at my Ebay account and see who I sold it to (I think it was Tod from Snoozers baits).....maybe he will send me some photos. I do know it was a 1750watt unit with 1/2NPT fittings and I ran it at 3PSI (required dedicated receptacle) Open pour molds? I believe we are using injection molds. At least I am. And with a heat exchanger there is a limit to its output. This is the reason for different size heat exchangers. Reheating sprues is a challenge with a heat exchanger too. Quote Link to comment Share on other sites More sharing options...
camrynekai Posted February 18, 2015 Report Share Posted February 18, 2015 When I was in business I did all open pour....still have hundreds of molds leftover if ya want any The heat exchanger had zero issues keeping up. Turn it on wait maybe 45 seconds, turn valve and I had a constant flow of ready to use plastic. I guess I just see too many people getting way to complacent with this hobby. Cant caution enough about the use of Pyrex, the use of non vented micro wave ovens and now more then ever I see and hear people using just any plain old silicone to pour hot plastic into....that is a very, very bad move.... I can just imaging the formaldehyde levels in your blood stream. Again I'm just not a fan of Pyrex! Witnessed a Pyrex failure many years ago at a buddies shop.....till you see a human wear 2 cups of 340 degree plastic you really have no idea of what your really playing with. Quote Link to comment Share on other sites More sharing options...
Frank Posted February 18, 2015 Report Share Posted February 18, 2015 When I was in business I did all open pour....still have hundreds of molds leftover if ya want any The heat exchanger had zero issues keeping up. Turn it on wait maybe 45 seconds, turn valve and I had a constant flow of ready to use plastic. I guess I just see too many people getting way to complacent with this hobby. Cant caution enough about the use of Pyrex, the use of non vented micro wave ovens and now more then ever I see and hear people using just any plain old silicone to pour hot plastic into....that is a very, very bad move.... I can just imaging the formaldehyde levels in your blood stream. Again I'm just not a fan of Pyrex! Witnessed a Pyrex failure many years ago at a buddies shop.....till you see a human wear 2 cups of 340 degree plastic you really have no idea of what your really playing with. If you are injecting the cup is not in your hand. I keep mine on a high sided griddle. If I spill or a pyrex breaks it is not in my hand. In fact the only time it is in my hand is when it comes out of the microwave and gets set on the griddle. I have had one break(not explode like some say) but it was my fault, I put it on a cold surface. 1 Quote Link to comment Share on other sites More sharing options...
camrynekai Posted February 18, 2015 Report Share Posted February 18, 2015 Just wanted to express that this hobby can not be taken so nonchalantly. 1 Quote Link to comment Share on other sites More sharing options...
Bogbaits Posted February 19, 2015 Author Report Share Posted February 19, 2015 (edited) Poured 100s of thousands of baits with my pyrex and never had one shatter,not one and I pour many and I repeat many different color and flake combinations every day as we have hundreds of color and flake combinations we sell,i don't thing you can do that with any speed with your set up and go price 4 microwaves,been doing this set up for years with no problems,love the cost and speed,like anything one must be carefull!!! Edited February 19, 2015 by prochallenger Quote Link to comment Share on other sites More sharing options...
alsworms Posted February 19, 2015 Report Share Posted February 19, 2015 The microwave setup always worked for me. Then again, by the time everyone else learned all these new methods, it was too late for me to change. That would have meant learning an entirely new program, and I was too lazy and stubborn to do that! LOL 2 Quote Link to comment Share on other sites More sharing options...
CNC Molds N Stuff Posted February 19, 2015 Report Share Posted February 19, 2015 (edited) I had a Pyrex cup shatter today, and I wasn't even making baits. I bumped it off the pouring bench with a broom handle while I was sweeping up in the shop. I guess I am going to have to remove that concrete floor. Edited February 19, 2015 by Bob La Londe 1 Quote Link to comment Share on other sites More sharing options...
backwoods1975 Posted February 19, 2015 Report Share Posted February 19, 2015 You all are impressive, I can barely keep up with 1 microwave 1 Quote Link to comment Share on other sites More sharing options...
