Jump to content
Acuna

Using Ladel And Regular Lee Pot To Pour 3/4 To 1 Oz. Jigs

Recommended Posts

I am looking at giving up using my Lee bottom pour pot due to frustration with it clogging and switching to a regular Lee pot and ladle to pour jigs.  Does anyone have any experience using a regular pot and ladle to pour the following molds:

 

1. Collins Custom Molds standup flipping jig with horizontal line tie.

2. Do It Arkie jig mold (1/4, 3/8, 1/2)

3. Do it Football Shakeyhead mold

4. Do It Football jig (1/2, 3/4)

 

Thanks in advance.

Link to comment
Share on other sites

Yes a small ladle will work just fine. However, when I have problems with pouring  from my bottom pour,, I use a ladle and just take the lead out from the top. However if your pot is not heating enough, then that won't work. Below is the ladle I have and I recommend. It hold 1-1/2 oz of lead, and it is very light, so it's easy on the hands. It is about $7 and all of your tackle component places sell them.  You have a PM from me.

Small 1-1.5 oz Ladle.jpg

Small 1-1.5 oz Ladle.jpg

Small 1-1.5 oz Ladle.jpg

Small 1-1.5 oz Ladle.jpg

Small 1-1.5 oz Ladle.jpg

Small 1-1.5 oz Ladle.jpg

Small 1-1.5 oz Ladle.jpg

Small 1-1.5 oz Ladle.jpg

post-13040-0-98609600-1425774117_thumb.jpg

Edited by cadman
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top