Jump to content
tukta

Putting Freehand Dots On Lures

Recommended Posts

I have been having problems putting dots on plastic cranks I'm reprinting I practice on paper and get that down pat so I go to the lure and I get blow out runny spots not the nice circle I'm looking for I can use a mask but don't want that sharp look what is a guy to do

Link to comment
Share on other sites

There are a bunch of different ways to do this, but I like to thin my paint until I can shoot it at low pressure and use a template. If you have your paint properly thinned and the pressure lowered enough the paint should come out as a mist and take a couple seconds just to spray a small dot.

 

Ben

  • Like 1
Link to comment
Share on other sites

Thanks everyone I tried the mask then I held it away and that was the answer nice soft edges .i was having trouble lining up where I wanted the dots so I took a toothpick dunked in the paint put a little dot and everything fell into place. Listen guys I appreciate all the info I've learned so much from you

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top