Bubbadoyle Posted July 15, 2015 Report Share Posted July 15, 2015 Just like the tilts says. Has anyone used the veranda trim boards for making crankbaits. They have it at my local Home Depot in 1" thick pieces. I have been using asek but was thinking of this if I wanted to make something thicker than the 3/4" azek. This is a link to what I am talking about. http://m.homedepot.com/p/Veranda-1-in-x-2-1-2-in-x-10-ft-White-HP-Reversible-Cellular-PVC-Trim-H250XWS208/205833495/ This Quote Link to comment Share on other sites More sharing options...
JRammit Posted July 15, 2015 Report Share Posted July 15, 2015 That looks like the same stuff i got... It works great... But when i cut it open i find holes and cracks in the center Quote Link to comment Share on other sites More sharing options...
Travis Posted July 16, 2015 Report Share Posted July 16, 2015 Yes several have used it, just have to wade through some posts to find it. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted July 16, 2015 Report Share Posted July 16, 2015 That looks like the same stuff i got... It works great... But when i cut it open i find holes and cracks in the center I think that is the same stuff I used when I had the crack issues. Azek doesn't have any. Quote Link to comment Share on other sites More sharing options...
jonister Posted July 16, 2015 Report Share Posted July 16, 2015 I was at home depot yesterday actually and found some of that, it is cheaper than Azek but after examining the sides and ends i noticed that there are gaps or air bubbles inside it. i asked someone who worked there for Azek and they said they did'nt carry it anymore. im not sure if it was just that store or the whole company. it would work if you got some pvc plastic filler, just a thought. Quote Link to comment Share on other sites More sharing options...
