andy1976 Posted August 24, 2015 Report Share Posted August 24, 2015 Anyone ever try using a pressure cooker to get plastic up to temp and keep it there. Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted August 24, 2015 Report Share Posted August 24, 2015 (edited) It would not make any difference. The idea of a pressure cooker, is that you raise the boiling point of water so that the water boils at say 230 degrees. This means that the higher temperature cooks the food faster. There is nothing in the plastic to increase the pressure (steam). Dave Edited August 24, 2015 by Vodkaman 1 Quote Link to comment Share on other sites More sharing options...
andy1976 Posted August 24, 2015 Author Report Share Posted August 24, 2015 Nice thanks. Figured there was a reason it hasn't been discussed. Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted August 24, 2015 Report Share Posted August 24, 2015 Keep thinking and keep the ideas coming. DAve 1 Quote Link to comment Share on other sites More sharing options...
Driftwood Posted August 24, 2015 Report Share Posted August 24, 2015 We have used a band heater to heat and keep the plastic hot in a pressure pot. Have also had an agitator placed in the top and a cocktail valve in the bottom to use as an injector for large batches. Not the safest method but it works. 1 Quote Link to comment Share on other sites More sharing options...
Basseducer Posted August 24, 2015 Report Share Posted August 24, 2015 Doesn't Lurecraft have a contraption like that? Quote Link to comment Share on other sites More sharing options...
