OAM Posted August 28, 2015 Report Share Posted August 28, 2015 why are my soft plastics have air pockets in the bodies? Quote Link to comment Share on other sites More sharing options...
JRammit Posted August 28, 2015 Report Share Posted August 28, 2015 Do you make your molds or buy them? Could be a venting problem or temperature problem Quote Link to comment Share on other sites More sharing options...
Jig Man Posted August 28, 2015 Report Share Posted August 28, 2015 I get air pockets when I inject too fast. 1 Quote Link to comment Share on other sites More sharing options...
mark poulson Posted August 29, 2015 Report Share Posted August 29, 2015 Try holding pressure on the injector for a couple of seconds after the cavity is filled before you take it off the mold. 1 Quote Link to comment Share on other sites More sharing options...
fishon-son Posted August 29, 2015 Report Share Posted August 29, 2015 what molds are you using....i had some issues with bears stick mold . the top two would not fill or had air pockets....i made a extender for the mold and get great baits every time...dont push to fast slow and steady works best. let the air move out as the hot plastic moves in.....then top off as your bait sucks in more plastic... Quote Link to comment Share on other sites More sharing options...
