Ballin21 Posted September 17, 2015 Report Share Posted September 17, 2015 Been interested in starting to make my own double buzzbaits. Could I get some info or could someone lead me in the right direction where I should start. Wire, modifying molds, blade, etc..... Thanks, Ballin21 Quote Link to comment Share on other sites More sharing options...
Munkin Posted September 18, 2015 Report Share Posted September 18, 2015 You can buy the heads pre-made or the other way is to pour on two frames. Allen Quote Link to comment Share on other sites More sharing options...
Ballin21 Posted September 18, 2015 Author Report Share Posted September 18, 2015 I was looking to start making them myself. Two frames, explain please. New to make double buzzbaits. Quote Link to comment Share on other sites More sharing options...
Big-D Posted September 19, 2015 Report Share Posted September 19, 2015 You need to get .035 wire forms (which are lighter than standard buzzbait forms) and mold two of them into one head. With the smaller wire, they will fit inside a standard spinnerbait hook. I also made the spaces for the wire legs slightly bigger with a small triangle file. Make sure the wires lay parallel in the mold before pouring. Hope this helps. -D Quote Link to comment Share on other sites More sharing options...
Ballin21 Posted September 20, 2015 Author Report Share Posted September 20, 2015 Thanks that helps big time. Quote Link to comment Share on other sites More sharing options...
Munkin Posted September 26, 2015 Report Share Posted September 26, 2015 That is how it is done. Allen Quote Link to comment Share on other sites More sharing options...
