LimpNoodle Posted November 15, 2015 Report Share Posted November 15, 2015 I just finished my initial run with the electrostaic gun. Results were better than expected. It seemed to be spraying a lot of powder to cover a jig but after collecting all the over sprayed powder I found not as much was wasted as I thought. I used a tooth brush to clean the powder off the hook and eye. Care needs to be taken while handling but it is possible to move your pieces around without knocking off powder. Some more fine tuning and I forsee being able to coat and cure up to 300 jigs an hour. With the right racks and a large oven you can do at least 1000 per hour. Quote Link to comment Share on other sites More sharing options...
