Roadkill Posted November 15, 2015 Report Share Posted November 15, 2015 I'm into making vintage lures and need to find a mold for a "Little Suzy". Very similar to a Little George but has a flat 45 degree angle (/) on the face. Have searched on line and Ebay with no results. Any help greatly appreciated. Quote Link to comment Share on other sites More sharing options...
fishon-son Posted November 16, 2015 Report Share Posted November 16, 2015 maybe ask one of the mold makers to see if they will help you out... Quote Link to comment Share on other sites More sharing options...
Fatman Posted November 16, 2015 Report Share Posted November 16, 2015 Sent you 2 pm's!! Especially look at the second one!!! Quote Link to comment Share on other sites More sharing options...
CNC Molds N Stuff Posted November 16, 2015 Report Share Posted November 16, 2015 http://store.do-itmolds.com/Cut-Face-Tail-SpinnerbrSz-38brHk-3551-or-7790XbrCollar-NA_p_955.html 1 Quote Link to comment Share on other sites More sharing options...
Roadkill Posted November 16, 2015 Author Report Share Posted November 16, 2015 OK, thanks to all so far. I've got the Do-It molds and they are not the same. The "Suzy" has a very flat face angled at about 45 degrees. I found one on Ebay that I have ordered. Soon as I get it I will try to post a pic if I can figure out how to do it. Thanks Again. Quote Link to comment Share on other sites More sharing options...
RayburnGuy Posted November 17, 2015 Report Share Posted November 17, 2015 Here ya go. Quote Link to comment Share on other sites More sharing options...
Roadkill Posted November 17, 2015 Author Report Share Posted November 17, 2015 Thanks RayburnGuy. YEP, that's the one I bought on Ebay in the hopes that I can get someone to make me a mold using that as an example. Quote Link to comment Share on other sites More sharing options...
Apdriver Posted November 18, 2015 Report Share Posted November 18, 2015 Thanks RayburnGuy. YEP, that's the one I bought on Ebay in the hopes that I can get someone to make me a mold using that as an example. I bet you can. The price might water your eyes a little bit. Just depends on how bad you want one. Quote Link to comment Share on other sites More sharing options...
Kasilofchrisn Posted November 18, 2015 Report Share Posted November 18, 2015 What is so different from the cutface tail spinner Do-It makes? Will the minor differences really matter to the fish? I.E. is it that radically different that you can see a difference in the lures action or your catch rate suffering? Just curious as I do see some differences but not enough for me to spend $200-$300 vs a $35 Do -It mold. But if you gotta have it you gotta have it. I do own some custom CNC molds myself but with the ones I have nothing comes close in size or style commercially. Quote Link to comment Share on other sites More sharing options...
edgecrusher Posted November 20, 2015 Report Share Posted November 20, 2015 He could rtv it, or have someone rtv it if he really wanted it. Quote Link to comment Share on other sites More sharing options...
Kasilofchrisn Posted November 20, 2015 Report Share Posted November 20, 2015 He could rtv it, or have someone rtv it if he really wanted it. Good point that would probably be the least expensive way to get a few copies of this bait. If it turns out a real winner then a more expensive aluminum mold could be ordered. You could most likely use the inserts for the cut face tail spinner Do-It sells. Quote Link to comment Share on other sites More sharing options...
Roadkill Posted November 20, 2015 Author Report Share Posted November 20, 2015 OK, Thank you all for the comments and advice. I think I'll go with most of the advice and just use the Do It cut face mold. Did some figuring and it would take forever to recover the cost of having a mold built. Thanks again and good fishing to all. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted November 21, 2015 Report Share Posted November 21, 2015 I would try taking that mold and grinding out the faces so they were straight, like you want. Or you could use some JB Weld to fill in the ends and make the mold face flat, but that would make it a little lighter. I've done both with other molds, and both ways work. Quote Link to comment Share on other sites More sharing options...
Chris hatcher Posted December 26, 2018 Report Share Posted December 26, 2018 On 11/14/2015 at 10:17 PM, Roadkill said: I'm into making vintage lures and need to find a mold for a "Little Suzy". Very similar to a Little George but has a flat 45 degree angle (/) on the face. Have searched on line and Ebay with no results. Any help greatly appreciated. I have 5 little suzy. And I think they are made by 6 and they are from the 1950s I believe or 60s Quote Link to comment Share on other sites More sharing options...
Chris hatcher Posted December 26, 2018 Report Share Posted December 26, 2018 Quote Link to comment Share on other sites More sharing options...
