Jump to content
Curt - RI

Free Lure Painting Webinar Tommorrow!

Recommended Posts

I fell asleep - certainly not because of the content of the webinar, but I had been up all night. The last I remember is the paints section.

 

Most unfortunate really, I was sat here clutching my HP-C plus, waiting for the action to begin. I will certainly pick it up from the replay layer on. Although I have not painted with an airbrush before, after 8 years on TU, I have read just about everything on the subject. I was looking forward to the actual painting part.

 

I know there are plenty of vids on the internet to learn with, and when I gather enough enthusiasm on the subject, I will watch them. But, at the moment, I have nothing to paint anyway.

 

I have just started work on a 4" four section lipless perch. The plan is for a hollow resin, to achieve close to neutral buoyancy. I had better get my calculations right, as this one is going from CAD straight to mold. I was thinking that this would be a good project to finally get some painting done, if it swims of course.

 

Dave

Link to post
Share on other sites

I had trouble getting on.  I used the link sent via email and it loaded up and gave me a "presenter hasn't started the presentation" message and stayed on the board.  At that same time my computer went to deathly slow and unable "resolve host".  I spent the following two hours getting things going again. Will have to check out the replay.

Link to post
Share on other sites

Travis - yes, there were problems at the start for everyone, probably for about ten minutes or so. It was resolved and after that it all went smoothly. A very good presentation I might add, particularly worth watching for those just getting started.

 

Dave

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...
Top