Jump to content
Lipz

Alumi-Uv - How Far Does It Go?

Recommended Posts

I really want to try the Alumi-uv, but can someone give me an idea about the coverage? I'm curious about how long a $30  4oz bottle would last? Approximately how many average size crankbaits (1.5/2.5) it would cover with a single coat? Some way to compare the cost verus 2-part epoxies. The stuff is expensive, and It seems like it would at minimum triple the cost per lure. :?

Link to comment
Share on other sites

I use another UV cure resin, Solarez.  Here's a link for comparison:

 

http://solarez.com/products/solarez-polyester-gloss-resin/

 

$23 for 32oz.

 

I have used it for several years now, and am on my second quart.  I did use a large part of the first quart for repairing my son's surfboard.  Plus I used some to make a resin mold for some detailed soft plastic baits.

I dip my lures in the garage, with all sunlight blocked out, and let them drip back into the container.  Once they've stopped dripping, I wipe off the drop that's still hanging from the bottom of the lure, and hang them in my UV nail light box for three minutes.  It gives a hard and strong coating for my PVC lures.

I've probably dipped 50+- lures/lure sections so far, and I still have most of the quart left.

Edited by mark poulson
  • Like 1
Link to comment
Share on other sites

Thanks Mark. I'll be ordering a quart for testing, as well as the supporting equipment needed for curing asap.

The major advantage with UV to me, would be time savings. Do you sacrifice any of the positive attributes of epoxy, with Solarez?

Pros & Cons of Solarez?

Link to comment
Share on other sites

I had problems with the Solarez leveling out. BobP says he puts his on a lure turner to level out and I have not tried that and probably won't since I have no need to carve, seal, paint, top coat and fish a lure all in the same day.

 

Solarez also has a film that forms on the surface when cured. Some say this can be buffed off, but again this isn't for me.

 

Everyone has their own build steps that suit them and if you find that Solarez meets what's important to you then that's great. It just wasn't for me.

 

Ben

Link to comment
Share on other sites

I had problems with the Solarez leveling out. BobP says he puts his on a lure turner to level out and I have not tried that and probably won't since I have no need to carve, seal, paint, top coat and fish a lure all in the same day.

 

Solarez also has a film that forms on the surface when cured. Some say this can be buffed off, but again this isn't for me.

 

Everyone has their own build steps that suit them and if you find that Solarez meets what's important to you then that's great. It just wasn't for me.

 

Ben

 

Hrumph!   :wink:

  • Like 1
Link to comment
Share on other sites

Just fyi I recently took the topcoat (alumni-uv) off of a lure body I wasn't happy with. This lure has been sitting on a shelf in my shop for at least 6 mths and when I chipped the topcoat there was an immediate chemical smell released. The smell is the same smell you have when your applying the alumiuv before curing it. I have used both solarex and the alumiuv product and IMO you get a better product with solarex. I have a post or two on here describing my disappointment s with the alumiuv product.

Link to comment
Share on other sites

We use both products each day and if you want to cure Auv you need a 300 wpi light. I own an American Ultraviolet system. Solarez is now making a new product that has no blush. It is fantastic. Great topcoat!!! Call Gary at Solarez and he can fill you in. I buy it by the gallon. The Solarez doesn't require a $9500 light.

Link to comment
Share on other sites

We use both products each day and if you want to cure Auv you need a 300 wpi light. I own an American Ultraviolet system. Solarez is now making a new product that has no blush. It is fantastic. Great topcoat!!! Call Gary at Solarez and he can fill you in. I buy it by the gallon. The Solarez doesn't require a $9500 light.

No blush, huh?  Interesting. Is it available on the website yet?

Link to comment
Share on other sites

I haven't looked lately, but if you call they are super nice and will help you. You need a Solarcure system for mass producing baits. Call Dennis and he can fix you up. I can tell you guys that uv is one of the best ways to build. Everything from glue , build coat and topcoat. That said it is a process. A nail light is a cheap substitution for doing it right. I speak from experience. I started out as cheap as I could but looking back you are way ahead to bite the bullet and do it right. I can start with a blank body and have caught a fish in 52 minutes counting travel time. The topcoat I use is as tough as any and dry in 4 seconds. If I can help feel free to ask!

Link to comment
Share on other sites

No, the unit runs at 125, 200 or 300 wpi. On 300 it will cure Solarez in 2.5 to 3 seconds. Alumiuv takes a couple seconds longer. I don't think Mike has as much of the go off stuff in his. It's just the brightest white hot (650 deg at the bulb) light you have ever saw. Sun light has nothing on it. Another lure builder was at the shop today and could not believe it. You have to wear ppe around it.

Link to comment
Share on other sites

300 watts?  Man, that has to be bright!  Fortunately, my 36 watt nail light and three minutes is plenty fast for me.  And I wear polarized sun glasses when I'm working with it.  I had a pterigium removed from one eye years ago, and have one on the other eye I don't want to get any bigger, so I wear polarized glasses whenever I go out into the sun.  

Link to comment
Share on other sites

With this you need a full face shield and a good long sleeve shirt. I am not a patient person when it comes to waiting on topcoats to dry. In my part of the country humidity and bugs are the enemy. I have tried everything from mcu, epoxy to uv. Power outage with 50 lures on a turner and it's a long night. With uv it's instant success. No bubbles, just super tough durable masterpieces. I have always took the extra step in improving my baits, and time is $$$.

  • Like 1
Link to comment
Share on other sites

Ah yes, there are additional issues to be dealt with, not unsermountable though.

 

At the initial stage of product testing, it is well worth knowing that you do not need to commit specialist equipment before seeing any results. Once the decision is made, a small UV lamp setup may well be very convenient and not too expensive.

 

Dave

Link to comment
Share on other sites

I have no experience with the Aluma UV but I do use the solarez polyester. I meant to get the gloss but accidentally got the polyester. It is a polyester resin so it polishes nicely but don't drop it! The blush is bad and if you hold it in your hand too long it gets sticky. It is fragile stuff. I use it as a build coat now and next time will buy the gloss. I hear it is stronger with less blush. It is nice fast stuff though, I would definitely recommend it. I just use a nail light.

Edited by jonister
Link to comment
Share on other sites

If it's sticky it ain't done cooking. Any UV product that you can smell or is tacky needs more cure. Sometimes I have some get in between the jaws of my forceps and not get light and you will get a whif of it. All uv products once fully cured become inert after curing I'm told by the manufacturers.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top