Jump to content
worm

Help With Shooting Star Heating Pots

Recommended Posts

Guys I bought the bears shooting star system. The system works great except when I inject the mold the 2 color plastic mixes into one color.

I'm using plastic from Do-it molds and the temp of the plastic is around 310 -  320. I'm confused on how to keep the plastic from mixing when injected.

 

 

Link to comment
Share on other sites

You're either orienting the injector wrong and need to spin it 90 degrees or there is too much of a temperature difference between the 2 pots. With the presto pots you cannot go by the temperature setting on the pots, you have to actually check the plastic temp

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top