majic man Posted March 17, 2016 Report Share Posted March 17, 2016 glue it with a little hot plastic. Should keep it in place. Quote Link to comment Share on other sites More sharing options...
CNC Molds N Stuff Posted March 18, 2016 Report Share Posted March 18, 2016 It just has to stay in place until the plastisol cools. Put a drop of platisol one it. Quote Link to comment Share on other sites More sharing options...
one-off baits Posted March 18, 2016 Author Report Share Posted March 18, 2016 Awesome. Thanks guys for all of your help Quote Link to comment Share on other sites More sharing options...
Frank Posted March 18, 2016 Report Share Posted March 18, 2016 You could also put a little bend in the rod. This will keep it in place till it cools. The picture I posted has a rod but what it does not show is it has a little swage mark to keep his weight from sliding. But his inserts are machined to tight tolerances. If you are using lead then the bend will work fine. 1 Quote Link to comment Share on other sites More sharing options...
