dlaery Posted August 28, 2016 Report Share Posted August 28, 2016 I spray a lot of 2 part epoxy with a regular paint gun. would an ultrasonic cleaner clean off the epoxy that get build up over a period of time? Quote Link to comment Share on other sites More sharing options...
Painter1 Posted September 1, 2016 Report Share Posted September 1, 2016 I can tell you that doesn't work for us with industrial epoxies. I'm in the industrial coatings application business and that would be a parts cleaning godsend if it did work. Quote Link to comment Share on other sites More sharing options...
dlaery Posted September 2, 2016 Author Report Share Posted September 2, 2016 I figured that but I thought I would ask. thanks! Quote Link to comment Share on other sites More sharing options...
ribeye Posted September 16, 2016 Report Share Posted September 16, 2016 I use laq.thinner and a good gun cleaning kit. Can pick them up at your local auto paint stores. Quote Link to comment Share on other sites More sharing options...
dlaery Posted September 16, 2016 Author Report Share Posted September 16, 2016 thanks, I use laq thinner, I guess I don't take enough time to scrub it every time. soaking it in laq thinner messes up the plastics parts in it. the main thing is keeping it out of the nozzle, I usually give it a good brushing but once in while it gets a little on it and messes up the pattern. i'm just looking for an better way if there is one. Quote Link to comment Share on other sites More sharing options...
ribeye Posted September 20, 2016 Report Share Posted September 20, 2016 Maybe try the SEM XXX gun cleaner. Part # 77743. That might work for you. I use that on my sata jet 90 hvlp spray gun. Quote Link to comment Share on other sites More sharing options...
