Groucho Posted November 29, 2016 Report Share Posted November 29, 2016 I've been searching for spinnerbait molds that have a ring for skirts and also a keeper for plastics if want to. Do-it has one- are there any others around. The sizes i would like are 1/8. 1/4, 3/8, and 1/2. Probably can't get all those sizes in one mold but would be nice. Thanks Quote Link to comment Share on other sites More sharing options...
Skimpy Posted November 30, 2016 Report Share Posted November 30, 2016 You can mod a mold to accept spinnerbait wires. Check out this video Quote Link to comment Share on other sites More sharing options...
JBarlow Posted November 30, 2016 Report Share Posted November 30, 2016 You can also modify almost any spinner bait mold to accept Do-It's wire keeper used in some of their jig molds. This wire keeper. I would use the longer wire keeper as it would be placed deeper in the spinner bait head and be more stable. http://store.do-itmolds.com/Wire-Keeper-Form-WB800_p_483.html 2 Quote Link to comment Share on other sites More sharing options...
Groucho Posted December 3, 2016 Author Report Share Posted December 3, 2016 In the video why doesn't the other arm interfere with the closing of the mold Quote Link to comment Share on other sites More sharing options...
smalljaw Posted December 4, 2016 Report Share Posted December 4, 2016 22 hours ago, Groucho said: In the video why doesn't the other arm interfere with the closing of the mold It actually does interfere, but the wire is far enough away that the back of the mold is slightly open but the cavity he is pouring is closed. Remember, that wire is thin, it is probably somewhere between .032" and .040" in diameter so the mold is open only a little on the back but because of the distance it allows the cavity to close completely. Quote Link to comment Share on other sites More sharing options...
Groucho Posted December 6, 2016 Author Report Share Posted December 6, 2016 so you can't use but the one space each time Quote Link to comment Share on other sites More sharing options...
Groucho Posted December 10, 2016 Author Report Share Posted December 10, 2016 Can you use straight wire and bend the R in it after the pour Quote Link to comment Share on other sites More sharing options...
21xdc Posted December 10, 2016 Report Share Posted December 10, 2016 Yes, But too much trouble for the gain... I posted on your other thread about this. 1 Quote Link to comment Share on other sites More sharing options...
