Jump to content
BrianB

Production pots...

Recommended Posts

There are a lot of options out there but you'll have to step outside of lure making. I found the candle industry has more available to shop from on-line. Especially for the hand pour guys. Also, they really are not hard to make. Start searching forums, you tube, etc.. Lots of good info to be found. If I were building a dual set up I would start with a heated blending block from Ultra Molds. You'll have to buy their injectors though (which I really like that he offers offset injectors too). Pretty simple set up really. Then there are stirring systems. Nothing wrong with the ones available through lure making suppliers. Not that difficult to make either. All depends on your skill set and what you're willing to spend. Hope this helps and good luck.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top