Richard Prager Posted April 4, 2017 Report Share Posted April 4, 2017 For those of you using KBS Diamond Clear.....can you dip the entire crank bait and hang or does it have to be put on the turner? I want to try something that can do this. Thank you.... Quote Link to comment Share on other sites More sharing options...
21xdc Posted April 4, 2017 Report Share Posted April 4, 2017 I turn mine after I let 10 seconds between drips fall off.... But I have let them hang w/o any trouble. 1 Quote Link to comment Share on other sites More sharing options...
Richard Prager Posted April 5, 2017 Author Report Share Posted April 5, 2017 Thank you, 21xdc! Quote Link to comment Share on other sites More sharing options...
SW Lures Posted April 5, 2017 Report Share Posted April 5, 2017 I hang mine with no trouble. The drip off is the only issue for me. I made a tree like hanger for multiple baits and I put a pane under it. The pan is no more then a large aluminum cooking pan that you buy for one time use. Dale 1 Quote Link to comment Share on other sites More sharing options...
Richard Prager Posted April 5, 2017 Author Report Share Posted April 5, 2017 1 hour ago, DaleSW said: I hang mine with no trouble. The drip off is the only issue for me. I made a tree like hanger for multiple baits and I put a pane under it. The pan is no more then a large aluminum cooking pan that you buy for one time use. Dale Thanks for posting, Dale....much appreciated! Do you just watch until it stops dripping and just wipe the last drop off the rear hook hanger or another way? Do I need to thin it? Thanks again! Quote Link to comment Share on other sites More sharing options...
SW Lures Posted April 5, 2017 Report Share Posted April 5, 2017 No I don't thin it. I haven't been using it long. I wipe the tail hanger and clean it up if needed. I've seen people using a string, but I didn't like that so I got a 1 1/4" and a 1/4" dowel with a piece of plywood and made the tree. Nathan turned me on to it. I was thinking about spaying, but I changed my mind. Dale Quote Link to comment Share on other sites More sharing options...
