Landry Posted April 18, 2017 Report Share Posted April 18, 2017 I posted this in the soft Plastic forum but you hard bait guys may be able to help me: Anyone here use envirotex epoxy on their master with platinum cure silicon like mold star 30?? I used it before with mold max tin cure and I wanted super glossy surface on my bait but am afraid it will inhibit the cure as I just found it on a list of possible inhibitors. Apparently I can cover with some krylon crystal clear acrylic but the finish on my epoxied bait is perfect as is. Suppose I should do a test spot but I was hoping someone here will have used this combo Thanks landry Quote Link to comment Share on other sites More sharing options...
Anglinarcher Posted April 19, 2017 Report Share Posted April 19, 2017 Do the test pot. I suspect that once the Etex is fully cured, and cleaned, it will be fine, but ..............clean the master with Etex with alcohol very well. 1 Quote Link to comment Share on other sites More sharing options...