Jump to content
Jig Man

Midwest Finesse jig mold first concern

Recommended Posts

 

Drill out the mold the diameter of your hook eye about 1/4 inch deep on both sides... Then over fill the holes with red rtv silicone and let dry.  Using a razor blade to cut off flush with the mold. Now you can pour any hook you want w/o any flash.

 

83c79cfa-1bdc-4a38-ab2c-650432247b9d_1.45d533f54bd456e9d4fa4986efcf3f50.jpeg?odnHeight=450&odnWidth=450&odnBg=FFFFFF

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top