fybo Posted June 25, 2017 Report Share Posted June 25, 2017 I was shipped a mislabeled barrel of Lureworks Injectasol, it was suppose to be medium but ended up being hard. Spike it outdoors sent me the softener to soften the plastic. Does anyone know how I would mix the softener and plastic to get a medium? Quote Link to comment Share on other sites More sharing options...
Baitjunkys Posted June 25, 2017 Report Share Posted June 25, 2017 Should be roughly 7%. Quote Link to comment Share on other sites More sharing options...
Frank Posted June 25, 2017 Report Share Posted June 25, 2017 16 hours ago, fybo said: I was shipped a mislabeled barrel of Lureworks Injectasol, it was suppose to be medium but ended up being hard. Spike it outdoors sent me the softener to soften the plastic. Does anyone know how I would mix the softener and plastic to get a medium? Well first off I would have asked them how much to put in. No one knows there plastic better than the one who made it. Second did you mix the whole drum real good when you got it? And did you use a pump to get it out? Only asking cause if it is not mixed well and you use a pump you will get hard plastic out of it. But when you add softener and mix well if becomes soft. 1 Quote Link to comment Share on other sites More sharing options...
Landry Posted June 27, 2017 Report Share Posted June 27, 2017 Yes. The Lurecraft saltwater hard packs pretty bad. I stir for a long time with an aluminum stick, then scoop out some to put in 1 gallon containers. This way I will have consistent plastic. Quote Link to comment Share on other sites More sharing options...
Baitjunkys Posted June 27, 2017 Report Share Posted June 27, 2017 (edited) Lureworks, lurecraft, 2 different things here. Edited June 27, 2017 by Baitjunkys Quote Link to comment Share on other sites More sharing options...
