Jump to content
ribeye

Plastic not curing like usual

Recommended Posts

44 minutes ago, MonteSS said:

Stir gently with a stick. No reason to agitate it that much

 

I mix drums with a 3.5" Prop attached to a motor spinning at 1800 rpm (called a drum agitator), no bubble problems to speak of. Before that I used a paint stirrer in a drill mixing 5 gallon pails, again, no bubble problems to speak of.  Don't mix air into the plastic and you shouldn't have an issue. 

 

Side note, have you ever tried to properly mix a bucket or drum this way?

  • Like 1
Link to comment
Share on other sites

I take a paint mixer to my 5gallon bucket every week and transfer the plastik to a 1 gallon container to fill my cups. I have had no problems doing it this way either. As long as your not over mixing as you color and pour your baits air bubbles should.be kept to a minimum in my opinion

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top