Jump to content
Bricklayer

How long to wait for Clear Finish?

Recommended Posts

Hi bricklayer,  cant advise on com-art. In my experience With createx it depends on how many or how heavy the coats , a few light coats of transparents can be heat set/dried with hair dryer or heat gun and epoxied an hour later, whereas heavy or multiple coats of opaque take longer.  I use a hairdryer on hottest setting for each coat to set regardless, be careful if you try this -it easy to burn or blister any undercoating.  Ideally I heat set/dry and leave 24 hrs before epoxy, this works for me...glider

Link to comment
Share on other sites

It can be tempting dale , with e-tex you end up with horrendous fish eye if paints not cured . Then you get to regret and possibly stamp you're feet(or much worse) ,swear to never do it again- till the next time !...glider

Edited by gliders
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top