Mikem934 Posted November 16, 2017 Report Share Posted November 16, 2017 What motors can be used for a drying rack? Quote Link to comment Share on other sites More sharing options...
DaBehr Posted November 24, 2017 Report Share Posted November 24, 2017 Search motor and you will find all sorts of input. Quote Link to comment Share on other sites More sharing options...
fshng2 Posted November 24, 2017 Report Share Posted November 24, 2017 (edited) This motor is the one I use for fly tying. 5 to 6 RPM is a perfect turning speed with enough torque to turn flies. https://m.ebay.com/itm/New-Stock-Synchronous-Synchron-Motor-50-60Hz-AC-110V-4W-5-6RPM-CCW-CW-J96J-/262352585850 Edited November 24, 2017 by fshng2 Quote Link to comment Share on other sites More sharing options...
fshng2 Posted November 24, 2017 Report Share Posted November 24, 2017 (edited) Fly Tying Dryer https://www.internationalangler.com/ProductDetails.asp?ProductCode=4E1Y-00-00&gclid=CjwKCAiAo9_QBRACEiwASknDwdT38AWNx1O_382fmoq1SDe8htDDh11xVujd6S9O4Uffj3wUT0rMSxoCZnkQAvD_BwE Edited November 24, 2017 by fshng2 Quote Link to comment Share on other sites More sharing options...
Phileas Fogg Posted January 4, 2018 Report Share Posted January 4, 2018 I used a motor off of one of those motorized wire reindeer christmas decorations. It does 5 rpm Quote Link to comment Share on other sites More sharing options...
geo315 Posted March 23, 2018 Report Share Posted March 23, 2018 I use the small motor from a microwave turntable to rotate my lures while the epoxy cures. Homemade rig but it works great. Geo. Quote Link to comment Share on other sites More sharing options...
FishCandy Posted March 24, 2018 Report Share Posted March 24, 2018 I used to do the same as geo. I buy them now because I use them for plugs, and the salvaged ones keep wearing out on me. The TYC ones I use now have metal innards instead of vinyl. https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR0.TRC0.H0.Xrobust+motors+for+microwave.TRS0&_nkw=robust+motors+for+microwave&_sacat=0 Quote Link to comment Share on other sites More sharing options...
Chuck Young Posted June 1, 2018 Report Share Posted June 1, 2018 I use the microwave motor also. I direct drive to a 1" pvc pipe. A section of swim noodle goes over the pipe. Flies and jigs can be inserted directly into the foam. The rate of rotation is perfect. The direction of rotation is random. Plenty of burned out microwaves around. Quote Link to comment Share on other sites More sharing options...
DylanCarey Posted June 26, 2018 Report Share Posted June 26, 2018 Agreed, a small motor from a microwave can be the best thing in this case. Also, I was searching for different options and found https://writebestessay.com/how-can-you-deal-with-research-paper-writing/ which posted an article about home engineer tools for fishing. Quote Link to comment Share on other sites More sharing options...
