Jig Man Posted December 7, 2017 Report Share Posted December 7, 2017 I have read on here about bending the "chatter bait" blades and which way for which application. My question is does it matter where you put the bend, middle/ upper portion/ or where? Quote Link to comment Share on other sites More sharing options...
Anglinarcher Posted December 7, 2017 Report Share Posted December 7, 2017 It does, but I can only say it depends a lot on the "blades" you have and what you want. With the blades I have (had a large stock for some time now), I only bend the upper third, and not very much. I have observed that the little bend in that location seems to get the blade moving quicker/sooner. Quote Link to comment Share on other sites More sharing options...
cadman Posted December 7, 2017 Report Share Posted December 7, 2017 I bend the upper third of the blade as well. That formula works for me on my blades. The question now lies on how much to bend. I usually start at 20 degrees up. Quote Link to comment Share on other sites More sharing options...
Jig Man Posted December 7, 2017 Author Report Share Posted December 7, 2017 Thanks guys. I knew someone had it figured out. Quote Link to comment Share on other sites More sharing options...
