Jump to content
Walking Dead

Spy Baits

Recommended Posts

If you look at a spybait, you'll see that it has a flat bottom, and the ballast extends up past the mid line of the bait.

The flat bottom provides resistance on the fall and swim, and the raised ballast provides instability, and the combination of the two makes the bait rock back and forth on the wall, and on the retrieve.

I made some that work, and that's what I learned in the process.

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

I took a 110 knock off and removed the bill, pinned the weights to their most forward position. Then heated the line tie and rear hook figure 8 eyes and removed them. Screwed in some small hook eyes with counter rotating spinners and it worked perfect. The flat belly on the 110 gave it the wobble on the fall, and the additional weight of the screw eyes and spinners gave it the fairly good sinking rate which could be adjusted by size of split rings and hook size.

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top