Chucktown Redfisher

Looking for Shad Heads for In-Line Spinner

13 posts in this topic

I am looking for heads that go on an in-line spinner like this. 

https://www.panthermartin.com/Lures/saltwater-freshwater/HulaRunner

https://www.fishusa.com/product/Blue-Fox-Flash-Spinners

I was not able to find anything on Barlows for Janns but may have missed it.  Also I have not found any other websites for spinnerbait parts.  Help appreciated!

Share this post


Link to post
Share on other sites

Are you needing just a few for yourself or are you trying to retail them?

If you are after a bunch of heads, Cast Industries is a good place to have them built.

If you're just after a few, I could probably hook you up with some.

Share this post


Link to post
Share on other sites

I was looking for some for myself.  If I cannot find any I will take you up on that offer.  The real reason I want the heads is because I want to be able to put a large eye on them.  Sea trout really key on that eye for some reason.  Any other ideas on how to get an eye on an inline spinner?

Share this post


Link to post
Share on other sites

I used an Ultra Minnow jig mold to step up the look of my inlines, several years ago. I believe the mold I used covered sizes from 1/4 to 5/8. I filed a groove for a pull pin and used an .051 buzz bait wire as a pin.

When I started my lure company I wanted a head that would use larger eyes so I had heads designed for me. I only have them in 1/4, 3/8, and 1/2 ounce. The 1/4 and 3/8 take a size 3 eye and the 1/2 takes a size 3.5.

If you decide you're interested in seeing them, message me a number and I'll text some pics. I'll be at an expo all next week, without my computer, so I might be a little slow to respond.

Share this post


Link to post
Share on other sites
10 hours ago, gaspumper said:

How about this head ,a little modification on the mold .Its called a diner shiner.

23kqfle.png

Gas pumper,  Do you make these?  How difficult would it be to make them so that they could slide onto an in-line?  

Share this post


Link to post
Share on other sites

Just happen to have a Diner Shiner in my pocket with no hook. Had a friend wondering the same thing so cast one without hook. Depending on how many you need just drill a hole threw the center. Could even make a drilling jig if needed.

IMG_2170[1].JPG

Share this post


Link to post
Share on other sites
1 minute ago, MT204 said:

Just happen to have a Diner Shiner in my pocket with no hook. Had a friend wondering the same thing so cast one without hook. Depending on how many you need just drill a hole threw the center. Could even make a drilling jig if needed.

IMG_2170[1].JPG

How do I go about getting some of these? Can I order heads without hooks from Barlows/Janns?

 

 

Share this post


Link to post
Share on other sites
16 hours ago, Chucktown Redfisher said:

Gas pumper,  Do you make these?  How difficult would it be to make them so that they could slide onto an in-line?  

No I do not pour these,but you can order the mold as suggested and pour your own ,just get a piece of stainless steel the diameter you need and lay across the mold close mold and tap lightly with a rubber mallet to make indent in mold.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now